Helping tools5102050100250500—VaikimisiOdavamad enneKallimad enneKoodi järgi A ... ZKoodi järgi Z ... ANime järgi A ... ZNime järgi Z ... AKategoorias tooteid 40Flexible Shaft, heavy-duty version, chuck 1 - 10 mmAV0009702692,12 €- +Lisa korviDetailsProduct description The flexible shaft enables you to perform precise and fine grinding in areas that are hard to reach, without compromising freedom of movement. Thanks to the three ball bearings, the flexible shaft runs very smoothly, providing precise control over your grinding tasks. This 8 mm round shank makes this shaft compatible with the majority of common power drills, which opens up a wi...Keevituskaitse Anti-Zip 12VAV0022316437,80 €- +Lisa korviDetailsThe Anti-Zap Protector 12 volt protects vehicle electronics while welding or jump starting. Prevents damage to electrical systems from voltage spikes during welding or jump starting. For use on 12 volt systems. Polarity protected - reverse connection warning. Designed to be fitted accross the battery terminals to absorb unwanted power surges. LED indicators: Green light on = protection; Red li...Universal Drill Clamp, Die-Cast Aluminium, SwivellingAV0008810437,65 €- +Lisa korviDetailsProduct Description Functional stand that can be attached to a table, designed for electric drills and other electronic devices with a 43 mm collar. Suitable for grinding, sharpening, polishing, and other tasks. Properties for power drills used in any position can be swivelled 360° in horizontal and 90° in vertical direction with Euronorm collar Ø 43 mm Technical data Material Die-cast aluminiumQuick-Release Chuck 0,5-6,5 mm With Hexagon ShankAV0008814011,94 €- +Lisa korviDetailsTechnical data Clamping width, max. 6.5 mmDirection of rotation Clockwise rotation Shank version Hexagon shank A/F 6.35 mm (¼") Clamping widths 0.5–6.5 mmTecmobil 200 Mobile Drilling AidAV0008816934,63 €- +Lisa korviDetailsProduct description The tecmobil 200 is a mobile drilling aid for drilling accurate holes. Thanks to the quick-mounting system without tools, fixing it in place is fast and easy. The positioning lines and inspection hole help you to accurately position the drill. The integrated dust collection bag helps to keep the working area clean. The mobile drilling aid is equipped with a practical handle and...Tecmobil Mobile Drilling AidAV0008817064,45 €- +Lisa korviDetailsProduct description The ideal accessory for your power drill, for precision drilling and hole sawing at given angles in any situation - on the wall, overhead, on slants, in round workpieces, battens and shaped sections. Properties with connector for dust extraction - dust-free and precise drilling in every position straight guide for drilling a number of holes in a line additional handle for prec...accumobil Mobile Drilling AidAV0008817114,65 €- +Lisa korviDetailsProduct description The accumobil Mobile Drilling Aid is the perfect solution for anyone who wants to drill holes at a 90° angle. Its practical design makes it easy to hold and enables reliable positioning on smooth surfaces. The rubber buffers provide added stability and protect the surfaces from damage. Positioning on round material or edges is not a problem either, thanks to integrated V-groove...Saw BuckAV00088173202,57 €- +Lisa korviDetailsProduct description The saw buck is an efficient and space-saving helper for sawing firewood. It offers exceptionally high capacity for a scissors-type buck. You can saw several logs measuring one metre in length into 25 or 33 cm pieces in one step. A wheelbarrow can be filled with two or three cuts, without having to stop the saw in between. A stop bar prevents danger from pieces of wood flying o...Flexible Shaft for Power drills 1,3 mAV0008829058,59 €- +Lisa korviDetailsProduct description The flexible shaft enables you to perform precise and fine grinding in areas that are hard to reach, without compromising freedom of movement. Thanks to the two ball bearings, the flexible shaft runs very smoothly, providing precise control over your grinding tasks. This 6 mm round shank makes this shaft compatible with the majority of common power drills, which opens up a wide...Flange Key for Angle Grinders, Straight, pin distance 30 mm, pin Ø 4 mmAV000883197,05 €- +Lisa korviDetailsTechnical data Pin diameter 4 mmPin spacing 30 mmMaterial Metal Additional product specification straightFlange Key Set for Angle Grinders, Straight, 2 pcs., with flange nut M 14, pin distance 35 mmAV0008832010,85 €- +Lisa korviDetailsTechnical data Pin diameter 5 mmPin spacing 35 mmThreaded connector M14 Material Metal Additional product specification straight Scope of delivery 1 straight flange key 1 flange nut M14 Parts in set 2 pcs.Universal flange key 30/35mmAV000883225,43 €- +Lisa korviDetailsProperties variable pin distance Technical data Pin diameter 4 mmPin spacing 30, 35 mmMaterial Metal Additional product specification straightSDS Plus Set “Economy line”: chuck 1.5 - 13 mm, female thread, for reversing drills, impact resistant; chuck key S 2 A; drill chuck adapter: SDS-plus fitting with 13 mm (1/2") threadAV0008833019,75 €- +Lisa korviDetailsInstructions for rotary use only - not impact-resistant Scope of delivery 1 drill chuck with 13 (1/2") x 20 mm female thread, clamping width 1.5 - 13 mm 1 chuck key S2A 1 drill chuck adapter SDS Plus with 13 (1/2") x 20 mm thread Parts in set 3 pcs.Dust Catcher for Drill Bits Ø 4 - 8 mmAV000883323,69 €- +Lisa korviDetailsProduct description This dust catcher collects dust produced during drilling tasks and thus prevents it from getting into the air or the environment. It is made of high-quality plastic and thus extremely durable. The drill bush is suitable for Ø 4-8 mm drill bits. Properties dust catcher for drill bits, in high-quality plastic design for durability drill bush suitable for Ø 4-8 mm drill bits Tech...Drill Stand with circular column (CE)AV0008842763,58 €- +Lisa korviDetailsProperties for drilling flat surfaces, round work pieces and battens with precision Technical data Product dimensions (W x D x H) 160 x 230 x 500 mmWorking heights 345 mmDepth 112 mmAdditional product specification milled worktop with clamping grooves for fastening clamping blocks or vices integrated return spring with round column cast iron plate 155 x 220 mm working stroke max. 60 mm with Eurono...Key-Type Drill Chuck, percussion drill resistant 1.5–13 mmAV0008851413,50 €- +Lisa korviDetailsTechnical data Clamping width, max. 13 mmThreaded connector 1/2" - 20 mmClamping widths 1.5–13 mmDirection of rotation Clockwise/anti-clockwise rotation Additional product specification hammer blow resistant female thread300mm Flat Bit ExtensionAV000892479,68 €- +Lisa korviDetails300mm Extension for use with Flat BitsSds-Plus Adapter For Chuck 1/2"AV000899781,67 €- +Lisa korviDetailsÜleminekSDS trellile 1/2" x 20 mmUniversal Drill Clamp, Plastic, RotatableAV0009060315,41 €- +Lisa korviDetailsProperties for power drills used in a horizontal or vertical position with Euronorm collar Ø 43 mm rotatable high quality "Made in Europe" Technical data Material PlasticDrill Stand, Euronorm Ø 43 mm, height 570 mm, for absolut exact drillingAV00092652178,37 €- +Lisa korviDetailsProduct description With the wolfcraft drill stand, you drill your workpieces in a controlled manner at the desired point and at the pre-set depth. The 40 mm round column, with a 420 mm toothed rack screwed on, ensures straight drilling without twisting. The Euronorm collar with its 43 mm diameter makes the drill clamp compatible with any commercially available power drill. Using the depth stop wi...Rivet Nut Attachment BGS, M3 / M4 / M5 / M6AV00092873144,44 €- +Lisa korviDetailsProduct description Rivet Nut Attachment BGS, M3 / M4 / M5 / M6. Converts any drill into a rivet gun, works with standard electric drills (reversible, min. torque 20 Nm), with mounting key. Features Converts any drill into a rivet gunWorks with standard electric drills (reversible, min. torque 20 Nm)With mounting keyWith threaded mandrels and nosepieces in M3 - M4 - M5 - M6Technical data Gross wei...Drill Chuck BGS, 13 mm, 4 pcs.AV0009344211,02 €- +Lisa korviDetailsProduct description Drill Chuck BGS, 13 mm, 4 pcs. With SDS adaptor, thread 1/2" x 20 UNF (BGS 9766), incl. Chuck Key Set. Features With SDS adaptor, thread 1/2" x 20 UNF (BGS 9766)Incl. Chuck Key SetTechnical data Packaging suitable for wall hanging: YesNumber of parts: 4Gross weight: 0.346 kgArticle no.: 9937Flange Nut for Angle Grinders ø 115/125/230 mmAV000940223,69 €- +Lisa korviDetailsTechnical data Threaded connector M14 Additional product specification bore pitch 26, 30, 35 mm According to standard DIN 44716 Machine area of working tables angle grinder Ø 115 / 125 / 230 mmCylinder Drill Bit Ø 26mm x 53 mmAV0008794410,85 €- +Lisa korviDetailsProduct description This cylinder drill bit made of high-quality tool steel is ideal for stationary drilling into softwood. The self-cutting centring tip ensures precision centre drilling, and the pre-cutting edge cleanly severs wood fibres. The drill bit is available in different sizes and has an Ø 8 mm round shank that can quickly be locked in the drill chuck. Suitable for material Very suitabl...Cylinder Drill Bit Ø 30mm x 53mmAV0008794312,04 €- +Lisa korviDetailsProduct description This cylinder drill bit made of high-quality tool steel is ideal for stationary drilling into softwood. The self-cutting centring tip ensures precision centre drilling, and the pre-cutting edge cleanly severs wood fibres. The drill bit is available in different sizes and has an Ø 8 mm round shank that can quickly be locked in the drill chuck. Suitable for material Very suitabl...Cylinder Drill Bit Ø 35mm x 53mmAV0008794212,59 €- +Lisa korviDetailsProduct description This cylinder drill bit made of high-quality tool steel is ideal for stationary drilling into softwood. The self-cutting centring tip ensures precision centre drilling, and the pre-cutting edge cleanly severs wood fibres. The drill bit is available in different sizes and has an Ø 8 mm round shank that can quickly be locked in the drill chuck. Suitable for material Very suitabl...Cylinder Drill Bit Ø 20mm x 53mmAV0008794110,74 €- +Lisa korviDetailsProduct description This cylinder drill bit made of high-quality tool steel is ideal for stationary drilling into softwood. The self-cutting centring tip ensures precision centre drilling, and the pre-cutting edge cleanly severs wood fibres. The drill bit is available in different sizes and has an Ø 8 mm round shank that can quickly be locked in the drill chuck. Suitable for material Very suitabl...Cylinder Drill Bit Ø 25mm x 53 mmAV000879405,47 €- +Lisa korviDetailsProduct description This cylinder drill bit made of high-quality tool steel is ideal for stationary drilling into softwood. The self-cutting centring tip ensures precision centre drilling, and the pre-cutting edge cleanly severs wood fibres. The drill bit is available in different sizes and has an Ø 8 mm round shank that can quickly be locked in the drill chuck. Suitable for material Very suitabl...LEWIS Auger Wood Drill Bit 10 x 460 / 360 mm Threaded Tip, Hex Shank 9 mm, BohrcraftAV0009458020,03 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 10 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 12 x 460 / 360 mm Threaded Tip, Hex Shank 10.9 mm, BohrcraftAV0009458122,39 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 12 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 14 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009458228,80 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 14 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 16 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009458330,60 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 16 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 18 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456433,90 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 18 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 20 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456534,35 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 20 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 22 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456635,48 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 22 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 24 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456742,32 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 24 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 26 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456845,85 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 26 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...LEWIS Auger Wood Drill Bit 28 x 460 / 360 mm Threaded Tip, Hex Shank 11.2 mm, BohrcraftAV0009456946,52 €- +Lisa korviDetailsProduct Description The Bohrcraft LEWIS heavy-duty auger wood drill bit 28 x 460 mm (working length 360 mm) is a professional framing and carpentry bit engineered for deep-hole boring in timbers and log structures. The self-feeding threaded screw tip draws the bit smoothly into the timber with minimal operator push. Featuring a single main cutting edge with spur (Z1) and an innovative "step-tip" g...Router table with adjustment plate | PRA1011AV00096849141,48 €- +Lisa korviDetailsProduct Description The robust aluminium router table from FERM is suitable for both specialists and do-it-yourselfers. Use this router table to create tight grooves and nice profile edges. The PRA1011 is an ideal accessory for routers with a base plate up to 162mm (Fits all FERM routers and most other routers). The FERM PRA1011 is equipped with a connection for dust extraction and a dustproof swi...Combitoolsset 100 pc. | CTA1007AV0009692521,31 €- +Lisa korviDetailsProduct Description The 100-piece combitool accessory set is ideal for a variety of tasks including sanding, cutting, engraving, and polishing. All accessories come neatly packed in a sturdy storage case, making them easy to transport and store. This set is suitable for use with FERM rotary tool models CTM1010, CTM1012, CTM1016, and CTM1017. Features Includes 100 different accessoriesSuitable for ...5102050100250500—VaikimisiOdavamad enneKallimad enneKoodi järgi A ... ZKoodi järgi Z ... ANime järgi A ... ZNime järgi Z ... A
