Eritööriistad

Komplektis komposiitkäepide ja akutrelli hoideotsik. Harju saab kasutada nii käsitsi kui ka el. seadmetes.
Komplekt sisaldab:
nailonharjasotsik Ø 8-9-10-11-12-13-14-15-16-17-18-19 mm
messingharjasotsik Ø 8-9-10-11-12-13-14-15-16-17-18-19 mm
terasharjasotsik Ø 8-9-10-11-12-13-14-15-16-17-18-19  mm 

Pneumaatilise ajamiga indikaator määrab bensiinimootoril ülemise surnud punkti.

Mobiilne ja kompaktne pukside ja šarniiride vahetamise pressraam. Kasutamiseks koos 12 t hüdraulilise silindri 22724T ja vaheadapteri 5445T-ga . Raami alumine plaat n-ö avatav ja hobuserauana silladetailidele paigaldatav. Kaasas pressvõru raami alumise plaadi sulgemiseks ja vajadusel lisaadapterite kasutamiseks. Tänu hüdraulilisele silindrile saab puksid ja šarniirid silladetailidest kätte neid au...

Kummist käepidemega. reguleeritav kuni 190 mm laiuste autoakude kandmiseks.

Profikasutse klaasivahetuse tugiraam. Iminappadega.

3-20 bar. fikseerklapiga. Kummist surukoonusega.

3-21 bar. fikseerklapiga. Vahevoolik 300 mm. M14 & M18 küünla-avadele.

Komplekt sisaldab mõõtekella 3-21 bar. adaptervoolikut 300 mm (M14 & M18 küünaldele) ja kummist surukoonusega 200 mm pikkust suru-adapterit. 

Klapisääre poolkuude lihtsamaks paigaldamiseks. Magnetiseeritud tööpinnad.

Ekstsentriline tikkpoldi väljakeeraja. Keeratav võtme või padruniga. Eriterasest.

CLASSIC kuuskantotsikute komplekt. Pikad ja lühikesed. Spetsiaalteras. Teraskarbis. 
Komplekt sisaldab:
1/2" keeramisadapter 10 mm otsikutele10 mm lühike kuuskantotsik 4-5-6-7-8-10-12 mm10 mm pikk (75 mm) kuuskantotsik 4-5-6-7-8-10-12 mm 

Käsifreeside komplekt pihusti kontaktpinna ja pihusti tipuava puhastamiseks. Tsentreerub kahest punktist - alt pihusti tipuavast ja kaane ülemiselt servalt sobiva diameetriga koonusega. Sobib Delphi. Bosch jne.

Lihtne. plastist siduriketta tsentreerimise abinõu.

Spetsiaaladapter 3-pin Denso pihustitele.

Laagrite ja rummu-võllitihendi paigaldamise taldrikud. Koos hoide-löökpeaga. Sisaldab läbimõõdud 40-44-50-59-63-65-72-76-81 mm.

Läbimõõt Ø 4 mm. 1/4" keeramisadapteri avaga.

Ø 3.5 mm. 1/4" keeramisadapteri avaga.

Kasutatakse roolilati külge mineva otsa lahti- ja kinnikeeramiseks. Siseotsa läbimõõtudele 24-42 mm. 1/2” fiksaator-keeramisotsaga. Fosfaattöödeldud.

Universaalne tööriist rihmaratta pööramiseks või fikseerimiseks. Haarab rattast kahe tihvtiga. Komplektis neli paari erimõõdulisi tihvte: 6-10. 8-11. 10-12. 11-16 mm. Vastavalt ratta diameetrile reguleeritav. Suur jõuõlg. kummiga kaetud käepide. 

Pukside ja laagrite välja- ja sissepressimise komplekt. Säästab oluliselt tööaega. võimaldades töö ära teha ilma detaili auto alt eemaldamata. Komplektis neli laagritega keermeslatti. diameetritega M10. 12. 14. 16. pikkusega 350 mm. 20 presshülssi. välisdiameetritega Ø 44. 46. 48. 50. 52. 54. 56. 58. 60. 62. 64. 66. 68. 70. 72. 74. 76. 78. 80. 82 mm.

JEEP Cheeroke/Chrysler Voyager 2.5/2.8 CRD.

Komplekt sisaldab kõiki enamlevinud pidurikolvi adapterplaate. vasak- ja paremkeermega keeramisspindlit. vaheplaati. Valmistatud tugevast eriterasest.

Kasutamiseks mootorsõidukite piduri- ja sidurisilindrite renoveerimisel.

T-peaga konksotsaga pidurivedru paigaldaja. Pikkus 160 mm. ots nurga all.

Sobib varupulgaks komplektile 1207T. Kõvasulamist. 8 mm.

1/4" kuuskantprofiiliga adapter. mille otsas 4-lõualine hoidepadrun.

Silindrite. laagriliudade. puuraukude. torude jne hoonimiseks/kraatide eemaldamiseks. Vahetatavad hooni kivid. painduv ajamvõll kasutamiseks madala pöördega suruõhutrelli või akutrelliga. Kasutusalad: mootorsõidukite piduri- ja sidurisilindrid. mootorrataste mootorisilindrid. muruniidukid. päramootorid. hüdraulikasilindrid. Lihvkivi pikkus 50 mm.

Kuue soonega. vasakpoolse spiraalselt aheneva keermega väljakeeramisabinõud poltidele. mutritele jne.
Komplekt sisaldab:
1/2” keeramispadrun. löök 10-11-12-13-14-16-17-18-19-21-22-24-27 mm 
Väljalöögipulk 

BMW pumba fikseerimise abinõu mootoritele N47 ja N47S. Sobib komplekti 28927T varuosana.

Seaderakiste komplekt VAG. 2.5. 4.9 (5.0) TDI PD mootorid (2.5 AXD. AXE. BAC. BLJ. BLK. BPD. BPC. BPE (2003-) 4.9TDI (5.0TDI) - AYH).

Ekstsentriline tikkpoldi väljakeeraja läbimõõdule 6.35-14.28 mm. Keeramiseks 19 mm võtme või padruniga. 

Pihusti korpuse väljapuurimise freeside komplekt. HSS terasest. 17-19-20 mm. Pehmes foam paneelis.

Audi. Volkswagen. Seat. Škoda 4- ja 5-silindrilised TDI mootorid. samuti Volkswagen T4 servopumpadele.

Ava suurus (võlli läbimõõt) 22.23 mm. Lihvimisketta läbimõõt 125 mm.

Renault. Opel. Nissan. mootor M9R. 2.0 Hpi.

Komplekt sisaldab enamlevinud võtmeid Euroopa. Korea ja Jaapani autode generaatorite remontimiseks.

Terasharjase läbimõõt 0.2 mm. 300 mm pikkused. Mõõdud OE 15x120 mm. OE 20x120 mm. OE 9x100 mm.

Spetsiaalne 10 mm. 6-kant adapter siseavaga Ø 7.5 mm. 1/2".

Uuema põlvkonna täissünteetiline "Low SAPS" mootoriõli, mis tagab puhtamad heitgaasid ning millega vähendatakse keskkonna saastatust. Sobib kasutamiseks nii bensiini- kui diiselmootorites (ka DPF tahmafiltriga ja pumppihustitega varustatud diiselsõidukid). Eelisteks on suurepärane külmkäivitus, optimaalne kaitse mootorile ja pikendatud hooldevälbad. ACEA C3; API SN/CF; GM dexos2; Renault RN 0700/ ...

Uuema põlvkonna täissünteetiline "Low SAPS" mootoriõli, mis tagab puhtamad heitgaasid ning millega vähendatakse keskkonna saastatust. Sobib kasutamiseks nii bensiini- kui diiselmootorites (ka DPF tahmafiltriga ja pumppihustitega varustatud diiselsõidukid). Eelisteks on suurepärane külmkäivitus, optimaalne kaitse mootorile ja pikendatud hooldevälbad. ACEA C3; API SN/CF; GM dexos2; Renault RN 0700/ ...

Uuema põlvkonna täissünteetiline "Low SAPS" mootoriõli, mis tagab puhtamad heitgaasid ning millega vähendatakse keskkonna saastatust. Sobib kasutamiseks nii bensiini- kui diiselmootorites (ka DPF tahmafiltriga ja pumppihustitega varustatud diiselsõidukid). Eelisteks on suurepärane külmkäivitus, optimaalne kaitse mootorile ja pikendatud hooldevälbad. ACEA C3; API SN/CF; GM dexos2; Renault RN 0700/ ...

For the removal of VAG and Porsche connectors Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc Black plastic handle for easy grip Saves time Fits directly onto the push and pull connectors

Sari katab praktiliselt kõik erinevad auto juures kasutatavad pistiku tüübid.

Sobib enamikele sõidu- ja pakiautodele mille hooratas on ilma laagrita.

Designed for the removal of the flywheel fixing bolts with 1/2"D Additional Information Impact quality with black phosphate finish. Made from Chrome Molybdenum. One piece construction for strength. Designed for the removal of the flywheel fixing bolts on MR9 2.0 DCi engines. Applications: Renault Espace, Laguna III, Trafic (06-10), Nissan DCIX engines fitted to Trial, Qashqai, Prima Star(06-10) an...

Automatic Transmission Fluid Adaptor for use with Laser Part No. 258-4792. Additional Information For use with Laser Oil Dispenser, Part No.4792. For use on many Volvo models from 2007 onwards. Essential tool. Time saver. Automatic Transmission Fluid adaptor.

Automatic Transmission Fluid adaptor for Volkswagen models Additional Information Application: Volkswagen Passat & Tiguan 2007 (4x4) onwards For use with Laser 4792 ATF Oil Dispenser or similar product Essential service tool for Haldex Diferential Volkswagen OEM number VAS-6291/2 Black finish

Kit includes 70 x Fuel Pipe Quick Connectors 12 x Straight couplings Nylon pipe in 3 ID - 2 x 6mm ID x 340mm, 6 x 8mm ID x 340mm, 2 x 10mm ID x 340mm Rubber Hose: 3 x 7.5mm ID x 200mm, 1 x 12mm ID x 200mm Twin Ear Clips: 12 x 15-18mm, 4 x 17-20mm. Plus 1 x Stainless Steel Blade Pipe Cutter Kit includes 70 x Fuel Pipe Quick Connectors 12 x Straight couplings Nylon pipe in 3 ID - 2 x 6mm ID x 340mm,...

A shorter version of the Laser 4369 that covers some BMW, Land Rover, Rover and GM models. Two sleeves are supplied to increase the application list. The BMW application allows the removal of the sprocket from the shaft when removing the injection pump VP44 and HP CR Pump. Used without centring ring for VP Pumps and with Common rail pumps. This kit has a shorter puller body to fit transverse engin...

Vauxhall/Opel Applications include: Antara from 2007, Astra-J from 2010, Insignia from 2009, SIGNUM 2003 to 2008, Vectra-C 2003 to 2008. Equivalent to Vauxhall/Opel OEM EN-48279 Applications: Mercedes Benz W204/W207/W212 E & C Class Applications: BMW/F01/F02/F10/F12, 7, 6 & 5 series Applications: Volvo T4/T5 engine 2010 onwards and S40, V40

Internal valve seat removal tool Applications: Denso common rail injectors For use with Laser injector adaptor - Part No 6119 3 pin x 2mm (12mm pin to pin) Manufactured from Chrome Molybdenum

17mm x 3/8"D Manufactured from Chrome Vanadium Application: Audi A1, A3, A4, A6, A8, Volkswagen Passat, Seat ibiza, Leon and Skoda Fabia 11, Octavia For nuts on high pressure fuel lines on diesel engine Length 78mm

An innovatively designed hand operated force tool combined with specifically machined adaptors to clamp the relevant fuel pipe and fit the connector in to the pipe Developed to ease the fitting of the hard plastic fuel pipe connectors supplied in Connect 37011 pipe and connector kit Applications fuel /air and vacuum pipes fitted with snap type connectors. Suitable for on vehicle use Hard pipe size...

Set includes setting spigot OEM ref. 23-047/2064. Setting bracket OEM ref. 21-105/2065A. For use on VAG models. Also Ford Galaxy 1.9 TDI (95-00). Made in Sheffield.

Specifically for use on Vauxhall/Opel 2.0/2.2 16v Eco-Tec engine Aluminium body Twin camshaft sprocket tool OEM ref KM 853

For use on Fiat 1.9 D | TD with Peugeot engines: Punto 1.9 D | Brava | Bravo 1.9 D Turbo | Marea | Weekend 1.9 D Turbo | Punto 1.9 JTD | Brava | Bravo 1.9 JTD | Marea | Weekend 2.4 JTD | Multipla 1.9 JTD 1996< | Marea 2.4 D Turbo | Marea Weekend 2.4 D Turbo and Alfa Romeo | Fiat 1.9 PSA derived D and TD engines. Additional Information For use on Fiat 1.9 D | TD with Peugeot engines. Also Alfa Rome...

For use on Honda Accord 1.8/2.0/2.2 V-TEC, Accord Coupe 2.0/2.2, Accord Aerodeck 2.0/2.2, Accord 2.3 1993-2003 with engine codes F18A3, F18B2, F20B3, F20B6, F20Z1, F20Z2, F20Z3, F22B5, F22B6, F22Z2, F23Z5, Accord Coupe 2.0, Prelude 2.0 1997-2003 with engine codes F20A4, F20B5, Shuttle 2.2i/2.3i 1995-2001 with engine codes F22B8 F23A7. Additional Information For use with a range of Honda models OEM...

Laguna | Safrane 2.0 | 2.5 16v 1996-2001 aastast. Engine codes: N7U, N7Q. OEM Ref MOT 1340 | 1348 | 1337.

This set of timing tools enables the correct timing position to be made when servicing Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models. Also suitable for use on Saab 9-3 with 2.2D Turbo engine. Additional Information Vauxhall/Opel Ecotec 2.0 engines fitted to Vectra-B, Sintra, Zafira, Frontera-B models. Also suitable for use on Saab 9-3/9-5 with 2.2D Turbo. O...

For locking the flywheel when changing the cambelt OEM No. KM 911 For use on the Z18 XE Vauxhall engine Made in Sheffield Time saver

Designed to cater for the dCi 2.2/2.5 diesel chain, belt and gear driven engines found in some later Nissan light commercial vehicles. Additional Information This set of timing tools enables the correct timing position to be held when servicing GM Ecotec 2.2/2.5 litre engines. Also for use on some Renault engines. For Interstar 2.2 and 2.5 dCi. Engine codes: G9U, G9T (2002-2010). Metal case availa...

Renault 1.5 and 1.9 dCi engines fitted to Laguna, Kangoo and Clio models Also: 1.5 dCi engines fitted across the Dacia, Nissan, Suzuki & Mercedes Benz ranges Renault engine code K9K (2002-on), Mercedes 607.951 (K9K) (2012 on) OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00 For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)

Timing tool kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0/2.4 For engines built from 2002-2010 Includes camshaft/crankshaft sprocket alignment pin, chain tensioner, fuel pump cover removal tool and fuel injection pump sprocket locking tool Supplied in foam tray

Renault Clio 1.5 (K9K), 1.9 (F9Q) and 2.3/2.5 dCi G9 engines used in Laguna II, Espace, Trafic and Master Plus 2.2 dTi (2000-05) engine codes G9T 720 in Vauxhall Movano 2.2 TDI Also Nissan Kubistar, Primastar, Interstar and Micra with 1.5/2.2/2.5 dCi engines (G9U, K9K, F9Q, G9T (2002-2009) OEM codes: MOT 1489, 1054, 1430, 1453, 1538, 1536, 1537, 1534

This new camshaft setting bar updates the existing 3096 and is suitable for all the applications Also included in the kit is 303-748 (21-259) for Focus/C-Max 1.6, 1.4/1.6 and Fiesta/Fusion 1.2/1.4/1.6 Also used on Volvo models with 1.8/2.0 CHAIN engines Made in Sheffield Camshaft Locking Strap now includes OEM 303-376B

This five piece set is essential for replacing the Cam belt on Ford Focus/Cmax 1.6 Ti-VCT with engine code HXDA (2003-2007) plus 2.0 TDCi with engine codes G6DA, G6DB, G6DC 2003-2007. Set includes Camshaft Sprocket Holding Tool (OEM 303-1097), Tensioner Pulley Locking Pin ( OEM 303-1054) Flywheel Timing Pin (OEM 303-1059), Crankshaft timing pin (OEM 303-748), Camshaft Sprocket Locking Tool (OEM 30...

Camshaft alignment pin OEM code KM 6340 Tensioner locking pin KM 6333 Suitable for Vauxhall/Opel/Astra G/ Astra H/ Meriva 1.6 16v with engines Z16LET | Z16XEP 2003-2007 Specialist engine timing tool

For 118i/120i (E87), 318i/320i (E90) and Z4 2.0 (E85) also 316i/316ti Compact (E46) and 318i/318ti Compact (E46) with N42 and N46 engines. Additional Information This kit has been developed for the 1.6/1.8/2.0 petrol engines Applications include: 118i/120i/316 Compact/318i/320i/Z4/X3 (2001-2010) With N42/N46 engines For engines with chain driven camshafts Made in Sheffield

This tool kit has been specifically designed to offer a simple solution for the Audi 2.0 petrol TFSi and FSi engines Additional Information: For Audi A3, A4 |A6 | S3 | TT 2.0 (2003-2010). Includes camshaft alignment tool, tensioner wrench and pin. Sold in foam tray with modular packaging. Available also in metal storage case (Part No 4536). Applications and guidance notes included.

A pair of locking pins designed specifically for the later Ford TDCi engine ranges Additional Information Includes a crankshaft/camshaft timing pin (OEM 21-263/303-735) Flywheel timing pin ( OEM 303-1059) For Ford Focus C-Max 1.6 2003-2008 with engine code HXDA

This tool is used to lock the chain tensioner in place on the VAG petrol engines that have a cam belt to drive one cam and then uses a chain to transfer the drive from one cam to the other Additional Information A camshaft retaining adjuster tool Ideal for a variety of VAG engines OEM No 3366 Specialist engine timing tool For use with chain driven engines

Fiat 1.3 JTD | Vauxhall Opel 1.3 CDTi | Ford 1.3 TDCi | Suzuki Z13DT engines plus Citroen/Peugeot F13DTE5 (FHZ) engines This set of tools allows the user to check and adjust the Camshaft timing, remove and replace the Cam chain and perform complete engine rebuilds whilst maintaining the correct Additional Information Includes: Flange Holding Wrench | 3 bolts 1/2"D OEM Ref: 1 871 000 200 303-1469 |...

An engine timing tool kit designed for the 1.6 chain driven, petrol engines on BMW N40 | N45 | N45T. Additional Information Applications: 116i E81/E87 | 316i E46/E40 | 316Ci/316Ti E46. Engine codes N40 | N45 | N45T. Chain engines. Made in Sheffield. Essential tool.

Engine timing locking tool kit for Chrysler 2.5 Common Rail Diesel engines fitted to Chrysler Voyager | Grand Voyager and LDV Maxus. Additional Information For use on Chrysler 2.5CRD diesel engines with engine codes R2516C | R2516I. Fitted to Voyager | Grand Voyager and LDV MAXUS. Essential tool. Manufactured from Selected steel. Made in Sheffield.

Lukustuskomplekt GM 2.0 CRD

Lukustuskomplekt BMW N43

Specifically designed for holding the sprocket/chain in place when disassembling the VP44 Injection pump and high pressure pump common rail.

1.2 CBZA; CBZB; CBZC 1.4 AXU; BKG; BLG; BLN; BMY; BWK; CAVA; CAVB; CAVC; CAVD; CAVE; CAVF; CAVG; CAXA; CAXC; CDGA; CKMA; CMSA; CMSB; CTHA; CTHB; CTHC; CTHD; CTHE; CTHF; CTHG; CTJB; CTJC 1.6 BAG; BLF; BLF; BLP; BTS; CNKA

Specifically for BMW and Land Rover (TD4).

Ford Transit 2.2 TDCI crankshaft locking kit Additional Information TDCI crankshaft locking kit Ford Transit 2.2 2006< Applications include Econetic and HDT engines Used to lock and time the crankshaft and flywheel to allow the TDC sensor position to be set after removal when servicing the cam chain drive system Made in Sheffield

Flywheel holding tool set BMW Mini Application: Chain driven petrol and diesel engines Including: BMW M47T2, M57T2, M67, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 Plus BMW Mini with W17 diesel engine OEM 11 8 180, 11 8 181, 11 8 182, 11 8 183, 11 8 184, 11 8 185

Applications: VAG models with 3 cylinder engines 4v 1.0litre 2012 onwards Equivalent to OEM tool T10476 Essential tool

Designed to hold the camshafts and crankshaft in their timed position during belt replacement Applications: Citroen C3111/DS3/DS3 Cabrio/C-Elysee and Peugeot 2008/208/308 Designed for the latest generation Citroen/Peugeot EBO & EB2 1.0L and 1.2L 3 cylinder engines Packed in EVA foam in a metal box Made in Sheffield

Chrysler Grand Voyager and Jeep Cherokee Applications: Jeep Cherokee 2.8CRD with Engine Code ENS(51C) from 2008-2011 and Chrysler Grand Voyager with Engine Code VM64C from 2008-2011 Equivalent to OEM VM 9991 and VM.9992 Includes crankshaft and exhaust camshaft locking tools Made in Sheffield

Application: 3 cylinder VAG engine currently found in the Volkswagen UP! engine code CHYA,CHYB Plus Seat Mii and Skoda Citigo Also for Blue Motion and Ecomotive plus Green Tech engines Camshaft belt tensioner wrench available - Part No. 6199 (OEM T10499) Made in Sheffield. Camshaft Locking Bar (C667) is EU Registered Design

The 6291 kit has been specifically designed for the new Ford 1.0lt 3 cylinder EcoBoost engines. This special tool set is used in conjunction with 6290 to assemble the VCT (Variable Camshaft Timing) units on the camshafts in their TDC position without play. 9604 Additional Information Application: Ford 1.0lt Turbo Charged EcoBoost Engines from 2012 fitted with Variable Camshaft Timing (VCT) Engine ...

Applications: BMW N47 and N57 1.6/2.0/3.0 Diesel Engines Equivalent to OEM 11 4 320 & 83 30 2 318 429 Use with Laser Part No 5196 Made in Sheffield

Part of the Laser range of engine timing tool kits and put together to provide the minimum tool requirement for setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges Additional Information Timing tool kit with Camshaft/Crankshaft alignment tools only Application: 1.3 JTD/HDi Diesel engines fo...

Camshaft adjuster holding and turning socket used to set and hold the camshaft adjusters on the latest “Generation III” TFSi 1.8 and 2.0 petrol engines across the VAG ranges. Additional Information For rotating and holding the intake camshaft during the timing chain service. Use with Laser 5981 Engine Timing Tool Kit and Laser 5920 Crankshaft Pulley Holding Tool Engines: 1.8 and 2.0 litre 4-cylind...

Ajastuskomplekt Bosch VE tüüpi ja analoogsetele Kikki ja Nippon Denso pumpadele.

A precision tool for finding the Top Dead Centre on diesel engines. 41mm diameter x 0-8mm x 0.01mm Additional Information: 41mm diameter x 0-8mm x 0.01mm Precision tool For checking the TDC on diesel engines Also useful for checking run out on brake discs Mounts directly onto the TDC Indicator (4151) to give an accurate reading for TDC

Allows damage free mounting of flexible multi ribbed belts Application: Citroen Jumper, Relay 2.2DT Fiat Ducato 4HF Ford Transit, Transit Tourneo 2.2d - C22DDOP, PGFA, P8FA, QVFA, QWFA Mitsubishi ASX 1.8d 4N1 and Peugeot Boxer 2.2d 22DT

Uuesti teritatavad. Pikku 270 mm. Komplektis mõõdud: 19mm, 22 mm, 25 mm, 38 mm.

Universaalne võti nukkvõlliratta hoidmiseks

A comprehensive tension wrench used widely in VAG engines including Seat | Skoda | Volkswagen & Audi vehicles. OEM ref Hazet 2587 | Matra V159. Additional Information 18mm pin centres/3mm pins. Applications include: Seat | Skoda | Volkswagen | Audi. OEM ref Hazet 2587 | Matra V159. Other versions of this tool are available including a swivel head version for access - Part No. 4447.

Tension lever for Volkswagen | Audi | Skoda vehicles. Additional Information Tension lever for Volkswagen | Audi | Skoda vehicles Soft grip handle for easy, comfortable use Alternative size also available - Part No. 3107 OEM code 3387/T10020 18mm pin centres/3mm pins

This kit brings together three of the most useful tensioner locking pins in one kit. These pins are used to lock serpentine belts and cambelts fitted to many of the VAG engines. Additional Information Set of 3 locking pins for holding the tension on the cambelt and serpentine (auxiliary) belts on VAG engines OEM Nos. T10115, T40011 - timing belt tension pins and T10060/A - serpentine tension pin U...

Tensioner Pulley Wrench 32mm for adjusting the Cambelt tensioning pulley on Audi and Volkswagen 2.5 TDi /Sdi engines Additional Information 32mm For adjusting the cam belt tensioning pulley Suitable for Audi and Volkswagen 2.5 TDI engines and some Volvos OEM 3355 Specialist tool

A tensioning tool for changing the V ribbed belt on many Volkswagen Audi Group engines including Volkswagen Passat, Golf and Polo from 1991 onwards. Use with standard 1/2"D ratchet or extension bar. Additional Information Volkswagen Passat, Golf and Polo, Polo Classic, Caddy 1993-99 1.9L Tdi (AHL) and 1.9TDi (AHU) 2.0 Gti/GL (ABA). Use with 1/2"D ratchet or extension bar. 1/2"D Time saving. Growin...

Auxiliary belt tensioner tool for Ford Durotorq engines 2.0 | 2.2 TDDI | TDCI fitted to Mondeo. Additional Information Tensioning tool or use on Ford Mondeo 2.0 | 2.3 TDDI | TDCI engines. Engine Codes: D5BA | D6BA | HJBA | B | HJBC | FMBA | B | N7BA | QJBB | QJBA. Manufactured from Selected steel. 8mm studs (52mm centre to centre) (43mm between the studs) OEM Tool 303-676

Tensioner Locking Pin Set Additional Information Six sizes For use on automatic belt tensioners Manufactured from spring steel Packed on a snap key ring Universal tool

Kasutamiseks VAG tagarummudele.

Includes M10S (special profile 6 pnt socket) for Toyota idler gear centre fixings, 20mm 10 point socket for Honda Civic lower control arm bolts. M6S, M8S, M12S (special profile 6 pt) for Nissan and Renault clutches, cylinder heads and balance shaft fixings. 8TS special 3 point profile for Nissan Balance shaft fixings. 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings 19...

For use on Girling brakes. Additional Information 1/2" drive 10mm Time saver For use on Girling brakes Socket manufactured from Chrome Vanadium, bit from S2 Silicone Steel

XZN M14 100mm 1/2 VW Passat ja Audi A3 tagasuportile

A disc brake pad spreader for use on most ATE | Bendix | Delco | Girling brake calipers. Fits between the two new pads being installed, then expands to retract the pistons. Additional Information For standard and 4 piston disc brakes. Suitable for use on most ATE | Bendix | Delco | Girling brake calipers. Quick and easy to use. Time Saver. Manufactured from Selected steel.

Pidurikolvi adapter VAG

Short series made from Chrome Vanadium. Sizes 7mm and 8mm Hex. Total length 24mm x 3/8"D. Ideal where space is restricted. Application: Mercedes-Benz C Class | Audi TT (2007-) | A4 (2001-) | A6 ( 2005- ) | A8 ( 2003-) plus others.

3-tapine adapter BMW Z4 (e89), 5-seeria (F10, F11, F18), 6-seeria (F12, F13), X3 (F25)

Two adjustable brake caliper rewind adaptors - 2pin and 3pin Includes magnetic 2 Pin Drive to 3/8"D adaptor Adjustable two pin adaptor fits 100s of cars Adjustable three pin adaptor only to be used with Electronic Park Brake (EPB) tools. Applications include: Audi, BMW, Iveco Daily, Renault, Range Rover Evoque, Seat, Volkswagen, Volvo Can be used with Laser's Brake Caliper Rewind Tools: 3993/3991/...

The advantage of this rewind tool is that it features a powerful internal spring. This applies firm pressure to the piston as you turn the T-handle to make sure the inner piston mechanism is wound back. The set also includes an adjustable three-pin adaptor which is designed for electronic park brake calipers. Again, the ability to adjust the adaptor means that it will fit many vehicle applications...

S Hooks 6mm x 200mm length These support hooks prevent the weight of the caliper damaging or stressing the brake pipes They can also be used for hanging test equipment such as diesel leak back bottles, bleed bottles etc. Dipped to avoid damage Ideal for many uses during car service

Võimaldab vormida SAE single & DIN double standardit. Sobib 4.75mm and 3/16” toru diameetrile, vask , vask-nikkel ja teras torudele. Sobib kasutamiseks torusid auto küljest eemaldamata!

Võimaldab painutada kahte erinevat profiili. Kasutamiseks standartse 5mm piduritoruga.

39 mm, 12-kanti, 1/2". Toyota Land Cruiser ja Lexus LX570

A castellated socket in 3/4"D specifically introduced for Volkswagen Crafter rear hub nuts. Additional Information Correctly hardened selected steel. Suitable for Volkswagen Crafter rear Hub Nuts (Also fits Mercedes Benz 511 twin rear wheel models) OEM T50017 3/4"D x 74mm. Also fits Vauxhall | Opel Movano and Renault. Vauxhall/Opel OEM number CH-50112

Wheel bearing lock nut socket specifically designed for the castellated lock nuts used to hold the wheel bearings in place on the rear axles fitted to RWD type 34 axles Additional Information Lock nut socket in 1/2"D x 60mm ID Applications: Ford Transit 80/100/115/120 with type 34 rear axles Correctly hardened and tempered RWD vehicles only Essential axle service tool

Front wheel bearing socket for Toyota Hiace (2006-). Additional Information Four pin design. Application Toyota Hiace 2006 onwards. 1/2"D. Selected steel. Essential tool.

A Thermal Imaging Camera that generates a visual coloured image of the heat spread on whatever area it is pointed at. It can be used to show the heat build up in all sorts of components and systems. It can also be used to quickly find hot and cold spots in cooling systems, air con systems, exhaust systems engine manifolds, wheel bearings, brake systems, electrical wiring circuits and even race car...

This screw type socket is 35mm and suitable for Citroën/Peugeot vehicles. Additional Information Screw type. 35mm. For Citroën and Peugeot. Selected Steel. Use with spanner or socket - 35mm.

For removing and replacing upper and lower suspension bushes on trailing arms. For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set.

Suitable for use on Peugeot Ball Joint Sockets Additional Information 1/2"Drive 41mm Suitable for Peugeot ball joint sockets Deep impact socket Manufactured in Chrome Molybdenum for strength

Rear suspension tool for trailing arm bushes Additional Information Rear suspension tool for trailing arm bushes. Ford Focus Mk 1 & II (98-07)(07<) | Kuga 2008< | C-Max MPV 2007 | Mazda 3 (Chassis BK) 2003<09 Saloon and Hatchback, 5 (Chassis CR, CW) MPV | 2005 Volvo V50 Estate 2004<2012, S40 Mk II Saloon 2003<2012. Always lubricate the bar thoroughly before and after use. Bar is considered consuma...

Front subframe bush tool with hole cutter for essential preparation Additional Information Applications: Vauxhall Vivaro, Renault Trafic, Nissan Primaster 2001<2013 Includes hole cutter for bush preparation. For use in situ Due to a combination of the construction of the subframe and the type of bush used, the raised outer ring of the bush must first be cut off flush to the subframe. This will all...

Rear trailing arm suspension bush tool kit Applications: Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017 Designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates

Application: Audi A4 2007<, A5 2009<, A6 2011<, A7 2010<, Q5 2010< Required for releasing the lower ball joint to free corrosion etc. Effectively a converter to allow the ball joint to be turned after releasing the pinch bolt. 1/2"D x 27mm Hex with 18mm diameter hole 36mm long

02D525558A

02D598574

30787687

31325173

31367940

G052175A1

G055175A2

1456979

33306760349

33306760592

33306786186

33326760668

33326768611

48198-60011

90119-14120

MB809335

BPW sildade 8-kant padrun (16 t sild). Keeratakse 41 mm löökpadruniga.

BPW rummukapsli 8-kant padrun. Sobib BPW sildadele. Läbimõõt 130 mm. Võtme suurus 111 mm. Keeratakse löökpadruniga 41 mm.

3/4" keeramisadapteri avaga 4-kõrvaga padrun. Läbimõõt 53 mm. Eriterasest. Sobib näiteks MAN.

Laagrite. hammasrataste ja äärikute eemaldamiseks. Pikendus adapterid keermega M10x1.5. Maksimaalne võimalik koostamise kõrgus pikenduste liitmise teel 290 mm.
Komplekt sisaldab:
Laagritõmmitsad välismõõdule 30-50 mm ja 50-75 mmTraavers trapetskeermega laius 160 mm Spindel trapetskeermega 170 mm Traaversi jalad 2x105-2x130 mmJalgade pikendused 2x105-2x130 mm

Kuulliigendi avaja 45 mm. Kahvliosa on õhuke. Eriterasest. Jõuspindel M22x90.

Messingust 250 mm pikkune silindriline torn. Kasutamiseks juhtudel kui on vaja delikaatselt läheneda. kuid puudub ligipääs. Laagrisaalede. pukside. äärikute ja sõrmede eemaldamiseks ja paigaldamiseks. Ei kahjusta terasest ja malmist pindasid.

Messingust 250 mm pikkune silindriline torn. Kasutamiseks juhtudel kui on vaja delikaatselt läheneda. kuid puudub ligipääs. Laagrisaalede. pukside. äärikute ja sõrmede eemaldamiseks ja paigaldamiseks. Ei kahjusta terasest ja malmist pindasid.

Messingust 250 mm pikkune silindriline torn. Kasutamiseks juhtudel kui on vaja delikaatselt läheneda. kuid puudub ligipääs. Laagrisaalede. pukside. äärikute ja sõrmede eemaldamiseks ja paigaldamiseks. Ei kahjusta terasest ja malmist pindasid.

Messingust 250 mm pikkune silindriline torn. Kasutamiseks juhtudel kui on vaja delikaatselt läheneda. kuid puudub ligipääs. Laagrisaalede. pukside. äärikute ja sõrmede eemaldamiseks ja paigaldamiseks. Ei kahjusta terasest ja malmist pindasid.

Professionaalseks mootoriremondiks. Väntvõlli keeramiseks VAG mootoritel. Vajalik väntvõlli reguleerimiseks ja keeramiseks mootori juhtseadme juures töötamisel. Kasutatav ka vastuhoidikuna. Tsentreerimistihvtiga. Peitsitud. Väga hea sobivus. Kasutusalad: Audi A4. A6. A8. Q7. 6 ja 8-silindrilised 2.4 ja 3.2 l FSI ning 6- ja 8-silindrilised TDI ühisanumsissepritsega mootorid.

DPF filtri puhastusseade 650 ml. Töösurve 3-7 bar.

Designed for DSG 7 speed dual clutch gearboxes fitted to VAG vehicles. Additional Information Assembly lever for use on DSG gear boxes. Composite handle. Suitable for Volkswagen and Audi vehicles. OEM T10407 Essential tool. Workshop manual must be consulted when using this tool

This engine timing tool kit is suitable for Ford Focus 1.4/1.6 TDCi chain engines with codes G8DA, G8DB, HNDA (2004-2006). The kit includes camshaft alignment tool, crankshaft alignment tool and crankshaft locking tool. Additional Information For 1.4/1.6 TDCi Ford chain engines with codes G8DA, G8DB, HHDA (2004-2006) Supplementary kit for use on specific engines For complete list of tools required...

For Ford diesel and petrol engines 3 Piece Flywheel Locking tool OEM 21-168/303-393 Flywheel Locking tool adaptor (01) 303-393-01 Flywheel Locking tool adaptor (01) 303-393-02

A range of timing tools for the latest EW coded PSA engine used on Citroën Xsara | Picasso | C5 | C4 | Evasion | Synergie | C8 | Jumpy | Dispatch and Peugeot 206 | 307 | 406 | Coupe 607 | 806 | 807 | Expert Engine Codes EW12J4(3FC) | EW10D-HPI(RLZ) | EW10J4S(RFK) | EW10J4(RFN/RFR) | EW7J4(6FZ). Additional Information A range of timing tools for the latest EW coded PSA engine used on Citroën. Xsara...

A set of sockets with the new Triangular profile (three sided) Additional Information New style security sockets M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm) x 1/2"D Manufactured from Chrome Vanadium Applications include: Electrical light fittings. Electrical cabinet tamperproof fixings Supplied on a socket rail for storage These new style security sockets (part number 5683) are design...

This brake caliper guide thread repair kit comes complete with a titanium coated core drill, tap and 10 threaded inserts Additional Information Suitable for Volkswagen Audi Group (90mm to centre to centre) | Opel/ Vauxhall (94mm centre to centre | Ford (105mm centre to centre) Repairs brake caliper guide threads. Permanent repair Space guides provided to ensure caliper guides are spaced correctly ...

Tööriistad asuvad pehmetes "EVA"-paneelides. Paneelide pesa on teist värvi, mis aitab märgata puuduva tööriista kuju.

MB809338

Pesa profiili lõikur. M10x1 + M10x1.25 120°. Korpuse osa freesi diameeter 8.8 mm. tipuosa 5.5 mm. Koonuse nurk 120 kraadi.

Defa Snap-On LED valgusti võrgukaablile.

Täiendavad ühendusadapterid VAG grupi DSG ja CVT tüüpi ning Mercedes Benz 722.9 tüüpi automaatkäigukastide õlivahetuseks. Komplektis M12. M24. M28. 

Manuaalseks mootorite ringiajamiseks 1/2" nelikant tapiga padrunsabaga. MAN D20 + D25 + D26 + D28.

Ülemineku adapter liughaamrile.

Rasvanööri paigaldamiseks veoki rehvidele. Pikkus 75 mm.

Varu-valtsplaat Triumf piduritoru valtsimise seadmele.

Plastkäepidemega. Harjased kahes reas. Pikkus 170 mm.

Tirrmehhanismiga silmus-lehtvõti 12 mm koos magnetiga padrunadapteritega 8-10 mm. M9XZN ja 8 mm nelikant. Sobib Wabco ja KNORR pidurisadulatele.

Pidurivedeliku paagile kinnitatav universaalne kork. 90° liidesega. Reguleeritav. Metallist.

Adapterit kasutatakse klappide lihvimiseks trelli abil. Elastse kummist vahedetailiga. mille loodud võnkumised kantakse läbi iminapa üle klapile. Parandab lihvimisefekti. Kaasas iminapad läbimõõtudega 22 ja 28 mm.

Liughaamri ülemineku adapter. M18x1.50->M20x1.50. 30787T-le.

Üleminek. kasutatakse koos hüdrosilindritega 34435T (18 t). 29227T (22 t).

V-profiil rihmaajamiga jahutusvedeliku pumpadele. generaatoritele. pumpade vedavatele rihmaratastele. ventilaatoritele jne. Kasutatav rihmaratastele läbimõõduga 50-200 mm. Üldpikkus 360 mm.

Mitmiksoon rihmaajamiga jahutusvedeliku pumpadele. generaatoritele. pumpade vedavatele rihmaratastele. ventilaatoritele jne. Kasutatav rihmaratastele läbimõõduga 50-200 mm. Üldpikkus 360 mm.

Varunõel.

Sobib komplektile 01-00009-101. 1090-32. 1090-15. 1090-16-10. 1090-16. 01-00009. 1090-37. 1090-54-12. 1091-13. 01-00025.

Sobib kasutamiseks VAG grupi mootoritel 1.8 ja 2.0 l TFSI / TSI. ketiga mootoritel (mootorite tüübid: BYT / BZB / CABA / CABB / CABD / CAWB / CBFA / CCTA / CCZA / CCZB / CCZC / CDAA / CDHA / CDHB / CDNB / CDNC / CDND / CFKA / CGYA / CCZA / CCZB / CCZD / CDAA / CDABBYT / BZB / CABA / CABB / CABD / CAWB / CBFA / CCTA / CCZA / CCZB / CCZC / CDAA / CDHA / CDHB / CDNB / CDNC / CDND / CFKA / CGYA / CCZA...

Klaasilõikamise komplekt töötab sae põhimõttel. Terastorust õõnesnõelaga. Sobib väga hästi laiade ja kõvade liimiribade läbistamiseks. Komplektis: lõiketraadi sond T-käepidemega 125 mm. tõmbekäepidemete komplekt. lõiketraat 22.5 m rullis.

53x89 Fi20/20

Ainuke "nuusutaja mida vajad"! Tunneb ära süttivad gaasid, vesiniku, kõik külmaained : CFC-d, HCFC-d ja HFC-d.

Separaatori asemel laagrivõrude vahelt tõmbamiseks. Otsikud 5. 6. 8. 9. 11. 12.5 mm.

VAG mootorite veepumba tõmmits.

Roostevabast terasest traat. töötab lõiketera põhimõttel. Sobib väga hästi kergesti ligipääsetavate liimiribade läbistamiseks.

Tõmmitsa juhthülss M8 hõõgküünalde eemalduskomplektidest.

M5-M16 mõõdule. Komplektis 5 x puur, 5 x eemaldamistapp, 10x juhtpuks.

Rattalaagri eemaldus- ja paigaldus komplekt 78 mm. MasterKit - komplektis kõik vajalik. Sobib näiteks Ford Focus II, C-Max, Mazda 3, Volvo C30, C70, S40, V50

Rattalaagri eemaldus- ja paigaldus komplekt 82 mm. MasterKit - komplektis kõik vajalik. Sobib näiteks Ford Focus, Mondeo Mk IV, Galaxy, S-Max. Volvo S80, V70, XC60, XC70

Reguleeritav alus pressile. Võimalik mugavalt pressida käänmiku küljes olevaid laagreid.

Erinevad tööriistad polstrite, lülitite, velje kapslite jne eemaldamiseks

Komplekt on mõeldud laagrite, pukside, tihendite kiireks ning efektiivseks eemaldamiseks ja paigaldamiseks. Komplektis 4 erineva läbimõõduga võlli M10x1,5; M12x1,75; M14x2,0; M16x2,0 pikkusega 450 mm (võti keeramiseks 27 mm). PS! JÄLGIDA VÕLLIDE MAX. KINNIKEERAMISE JÕUDE (võllid on kuluosad!). EI SOBI SURUÕHUPÜSTOLIGA TÖÖTAMISEKS! Hülside mõõdud: (sise: 34,36,38,40,42,44,46,48,50,52,54,56,58,60,62...

Adapterite komplekt on mõeldud kasutamiseks koos pidurivedeliku vahetamise seadmega 1881. Sisaldab 5 erimõõdus adapterit.

Spindel. Tugevus 12.9.

Kasutatakse koos tootega 1090-69.

Varuadapter vargamutrite avamise komplektist. Tüüp C.

Tõmbespindel komplektile 1307T. M16x95 mm.

Nissan. Opel. Renault diiselmootorite CDI 1.5.1.9.2.2.2.5 DCI nukkvõlli seade rakis. Sobib: OPEL: Movano 1.9 CDTi. 2.2 / 2.5 DTi (00-06). Vivaro 1.9 / 2.5 DTi (01-06). RENAULT: Clio. Megane. Scenic. Laguna. Espace. Kangoo. Traffic. Master; 1.5. 1.9. 2.2. 2.5 dCi Common Rail Diesel. NISSAN: Micra 1.5 dCi. Primera (02-08). Kubistar 1.5 dCi ( 03-08 ); Primastar 1.9 / 2.5 dCi (03-08).

Sobib valdavalt Jaapani tootjatele. Amortisaatori varre lapiku osa paksus 9.0 mm. suurim diameeter 12.0 mm.