Special tools

Ajastuskomplekt Bosch VE tüüpi ja analoogsetele Kikki ja Nippon Denso pumpadele.

A precision tool for finding the Top Dead Centre on diesel engines. 41mm diameter x 0-8mm x 0.01mm Additional Information: 41mm diameter x 0-8mm x 0.01mm Precision tool For checking the TDC on diesel engines Also useful for checking run out on brake discs Mounts directly onto the TDC Indicator (4151) to give an accurate reading for TDC

Allows damage free mounting of flexible multi ribbed belts Application: Citroen Jumper, Relay 2.2DT Fiat Ducato 4HF Ford Transit, Transit Tourneo 2.2d - C22DDOP, PGFA, P8FA, QVFA, QWFA Mitsubishi ASX 1.8d 4N1 and Peugeot Boxer 2.2d 22DT

Uuesti teritatavad. Pikku 270 mm. Komplektis mõõdud: 19mm, 22 mm, 25 mm, 38 mm.

Universaalne võti nukkvõlliratta hoidmiseks

A comprehensive tension wrench used widely in VAG engines including Seat | Skoda | Volkswagen & Audi vehicles. OEM ref Hazet 2587 | Matra V159. Additional Information 18mm pin centres/3mm pins. Applications include: Seat | Skoda | Volkswagen | Audi. OEM ref Hazet 2587 | Matra V159. Other versions of this tool are available including a swivel head version for access - Part No. 4447.

Tension lever for Volkswagen | Audi | Skoda vehicles. Additional Information Tension lever for Volkswagen | Audi | Skoda vehicles Soft grip handle for easy, comfortable use Alternative size also available - Part No. 3107 OEM code 3387/T10020 18mm pin centres/3mm pins

This kit brings together three of the most useful tensioner locking pins in one kit. These pins are used to lock serpentine belts and cambelts fitted to many of the VAG engines. Additional Information Set of 3 locking pins for holding the tension on the cambelt and serpentine (auxiliary) belts on VAG engines OEM Nos. T10115, T40011 - timing belt tension pins and T10060/A - serpentine tension pin U...

Tensioner Pulley Wrench 32mm for adjusting the Cambelt tensioning pulley on Audi and Volkswagen 2.5 TDi /Sdi engines Additional Information 32mm For adjusting the cam belt tensioning pulley Suitable for Audi and Volkswagen 2.5 TDI engines and some Volvos OEM 3355 Specialist tool

A tensioning tool for changing the V ribbed belt on many Volkswagen Audi Group engines including Volkswagen Passat, Golf and Polo from 1991 onwards. Use with standard 1/2"D ratchet or extension bar. Additional Information Volkswagen Passat, Golf and Polo, Polo Classic, Caddy 1993-99 1.9L Tdi (AHL) and 1.9TDi (AHU) 2.0 Gti/GL (ABA). Use with 1/2"D ratchet or extension bar. 1/2"D Time saving. Growin...

Auxiliary belt tensioner tool for Ford Durotorq engines 2.0 | 2.2 TDDI | TDCI fitted to Mondeo. Additional Information Tensioning tool or use on Ford Mondeo 2.0 | 2.3 TDDI | TDCI engines. Engine Codes: D5BA | D6BA | HJBA | B | HJBC | FMBA | B | N7BA | QJBB | QJBA. Manufactured from Selected steel. 8mm studs (52mm centre to centre) (43mm between the studs) OEM Tool 303-676

Tensioner Locking Pin Set Additional Information Six sizes For use on automatic belt tensioners Manufactured from spring steel Packed on a snap key ring Universal tool

Kasutamiseks VAG tagarummudele.

Includes M10S (special profile 6 pnt socket) for Toyota idler gear centre fixings, 20mm 10 point socket for Honda Civic lower control arm bolts. M6S, M8S, M12S (special profile 6 pt) for Nissan and Renault clutches, cylinder heads and balance shaft fixings. 8TS special 3 point profile for Nissan Balance shaft fixings. 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings 19...

For use on Girling brakes. Additional Information 1/2" drive 10mm Time saver For use on Girling brakes Socket manufactured from Chrome Vanadium, bit from S2 Silicone Steel

XZN M14 100mm 1/2 VW Passat ja Audi A3 tagasuportile

A disc brake pad spreader for use on most ATE | Bendix | Delco | Girling brake calipers. Fits between the two new pads being installed, then expands to retract the pistons. Additional Information For standard and 4 piston disc brakes. Suitable for use on most ATE | Bendix | Delco | Girling brake calipers. Quick and easy to use. Time Saver. Manufactured from Selected steel.

Pidurikolvi adapter VAG

Short series made from Chrome Vanadium. Sizes 7mm and 8mm Hex. Total length 24mm x 3/8"D. Ideal where space is restricted. Application: Mercedes-Benz C Class | Audi TT (2007-) | A4 (2001-) | A6 ( 2005- ) | A8 ( 2003-) plus others.

3-tapine adapter BMW Z4 (e89), 5-seeria (F10, F11, F18), 6-seeria (F12, F13), X3 (F25)