Special tools

Two adjustable brake caliper rewind adaptors - 2pin and 3pin Includes magnetic 2 Pin Drive to 3/8"D adaptor Adjustable two pin adaptor fits 100s of cars Adjustable three pin adaptor only to be used with Electronic Park Brake (EPB) tools. Applications include: Audi, BMW, Iveco Daily, Renault, Range Rover Evoque, Seat, Volkswagen, Volvo Can be used with Laser's Brake Caliper Rewind Tools: 3993/3991/...

The advantage of this rewind tool is that it features a powerful internal spring. This applies firm pressure to the piston as you turn the T-handle to make sure the inner piston mechanism is wound back. The set also includes an adjustable three-pin adaptor which is designed for electronic park brake calipers. Again, the ability to adjust the adaptor means that it will fit many vehicle applications...

S Hooks 6mm x 200mm length These support hooks prevent the weight of the caliper damaging or stressing the brake pipes They can also be used for hanging test equipment such as diesel leak back bottles, bleed bottles etc. Dipped to avoid damage Ideal for many uses during car service

Võimaldab vormida SAE single & DIN double standardit. Sobib 4.75mm and 3/16” toru diameetrile, vask , vask-nikkel ja teras torudele. Sobib kasutamiseks torusid auto küljest eemaldamata!

Võimaldab painutada kahte erinevat profiili. Kasutamiseks standartse 5mm piduritoruga.

39 mm, 12-kanti, 1/2". Toyota Land Cruiser ja Lexus LX570

A castellated socket in 3/4"D specifically introduced for Volkswagen Crafter rear hub nuts. Additional Information Correctly hardened selected steel. Suitable for Volkswagen Crafter rear Hub Nuts (Also fits Mercedes Benz 511 twin rear wheel models) OEM T50017 3/4"D x 74mm. Also fits Vauxhall | Opel Movano and Renault. Vauxhall/Opel OEM number CH-50112

Wheel bearing lock nut socket specifically designed for the castellated lock nuts used to hold the wheel bearings in place on the rear axles fitted to RWD type 34 axles Additional Information Lock nut socket in 1/2"D x 60mm ID Applications: Ford Transit 80/100/115/120 with type 34 rear axles Correctly hardened and tempered RWD vehicles only Essential axle service tool

Front wheel bearing socket for Toyota Hiace (2006-). Additional Information Four pin design. Application Toyota Hiace 2006 onwards. 1/2"D. Selected steel. Essential tool.

A Thermal Imaging Camera that generates a visual coloured image of the heat spread on whatever area it is pointed at. It can be used to show the heat build up in all sorts of components and systems. It can also be used to quickly find hot and cold spots in cooling systems, air con systems, exhaust systems engine manifolds, wheel bearings, brake systems, electrical wiring circuits and even race car...

This screw type socket is 35mm and suitable for Citroën/Peugeot vehicles. Additional Information Screw type. 35mm. For Citroën and Peugeot. Selected Steel. Use with spanner or socket - 35mm.

For removing and replacing upper and lower suspension bushes on trailing arms. For use on Vauxhall Vectra B models (>2002). Always lubricate nut and bar before and after use. Two bars are included with this set.

Suitable for use on Peugeot Ball Joint Sockets Additional Information 1/2"Drive 41mm Suitable for Peugeot ball joint sockets Deep impact socket Manufactured in Chrome Molybdenum for strength

Rear suspension tool for trailing arm bushes Additional Information Rear suspension tool for trailing arm bushes. Ford Focus Mk 1 & II (98-07)(07<) | Kuga 2008< | C-Max MPV 2007 | Mazda 3 (Chassis BK) 2003<09 Saloon and Hatchback, 5 (Chassis CR, CW) MPV | 2005 Volvo V50 Estate 2004<2012, S40 Mk II Saloon 2003<2012. Always lubricate the bar thoroughly before and after use. Bar is considered consuma...

Front subframe bush tool with hole cutter for essential preparation Additional Information Applications: Vauxhall Vivaro, Renault Trafic, Nissan Primaster 2001<2013 Includes hole cutter for bush preparation. For use in situ Due to a combination of the construction of the subframe and the type of bush used, the raised outer ring of the bush must first be cut off flush to the subframe. This will all...

Rear trailing arm suspension bush tool kit Applications: Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017 Designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates

Application: Audi A4 2007<, A5 2009<, A6 2011<, A7 2010<, Q5 2010< Required for releasing the lower ball joint to free corrosion etc. Effectively a converter to allow the ball joint to be turned after releasing the pinch bolt. 1/2"D x 27mm Hex with 18mm diameter hole 36mm long

02D525558A

02D598574

30787687